食物转化视角下我国家庭食物浪费程度与影响因素——基于CHNS数据的实证分析

长期以来,我国食物供应充足稳定,但是人口、环境等因素不断对此提出挑战,并且我国每年的食物损失和浪费数量十分惊人。从食物转化视角将食物浪费率定义为家庭食物消费中未能正常转化为家庭成员身体质量指数的比例,采用随机前沿模型并基于CHNS数据估算我国家庭食物浪费率,并探讨家庭异质性特征的影响。结果显示：家庭平均浪费率为11.28%;家庭规模越小、孩子或老年人的数量越多、收入水平越高、南方地区、户主的受教育程度越低、主要女性成员的受教育程度越高或者有工作、对膳食知识掌握程度越低的家庭浪费率越高。因此,要鼓励生产小包装食物和小型厨具,指导家庭根据实际需求购买食物,加强推广食育运动,开展节粮活动并教授减损措施。     

日本食品废物不同资源化技术下的碳排放比较研究

应用生命周期评价法（LCA）,采用日本农林水产省和环境省的调查数据和统计数据,对不同资源化技术处理食品废物碳排放进行评价.10种资源化技术相比于3种非资源化（主要是焚烧）技术的结果表明,食品废物生命周期各阶段碳排放最多的是预处理+处理阶段,约占85%;最少的是回收阶段,可抵消部分排放.此外,全生命周期总排放,甲烷化（循环消化液）是最有利于温室气体减排的技术,可减排380.6kg CO₂e/t,通过调节参数核算日本城市生活垃圾的减排潜力每年约为5586万tCO₂e.甲烷化（单纯）、肥料化均减少温室气体排放,并且前者减排效果优于后者.而废物固形燃料（RDF）、甲烷化（与地下水混合）、饲料化（液化）、甲烷化（混合焚烧）、碳化、乙醇化、饲料化（额外干燥）与发电焚烧、无发电焚烧、焚烧可燃垃圾（无发电）依次增加了温室气体的排放.不考虑再生品的异地运输,则甲烷化（与地下水混发电焚烧合）相比饲料化（液化）产生更少的温室气体排放,其他次序按照技术的优劣性保持不变.     

不同预处理方法促进剩余污泥发酵制氢研究进展

综述了剩余污泥发酵制氢的底物预处理方法,主要包括物理法（热水解法、微波法、超声波法、冻融法）;化学法（酸碱预处理、臭氧氧化法）;生物法（生物强化技术、生物酶法）,分析比较了不同预处理方法的剩余污泥发酵制氢体系的氢气含量及产率,污泥处理后溶解性化学需氧量、挥发性脂肪酸含量的变化和工程应用的优缺点,并指出目前研究存在的一些不足和对未来应用前景的展望,以期为剩余污泥发酵制氢预处理方法的研究与应用提供依据.     

兼氧条件下厨余垃圾发酵液作碳源的反硝化性能

在兼氧条件下,利用厨余垃圾厌氧发酵液调节反硝化系统的碳氮比（COD/TN,C/N）,并考察了其脱氮性能.结果表明,不同C/N条件下,反应系统均未出现有机物的积累,但高C/N条件下的亚硝酸盐最大积累浓度和积累速率高于低C/N;随着进水C/N的增大,反应整体脱氮率和反硝化速率不断增大,当C/N为13时,反硝化速率达到了最大值,为9.79mg/（gVSS·h）,其脱氮率超过95%;相同C/N条件下,反硝化速率和最大亚硝酸盐积累浓度均与进水硝酸盐浓度成正比.此外,实验结果表明,兼氧条件下的反硝化过程虽不易出现COD残留,但去除单位氮所需的有机物更多,且整体反硝化速率以及亚硝酸盐还原速率均低于厌氧条件.     

3D打印技术在固体废弃物资源循环中的应用

打印材料是限制3D打印技术发展和推广应用的瓶颈问题,目前已经发现部分固体废弃物与3D打印的契合度很高,可以用于制备3D打印材料.本文综述了4类可以用于3D打印的固体废弃物,包括硅铝基废弃物、农林废弃物、废旧塑料和废旧金属,着重讨论了这4类废弃物制备3D打印材料的方法以及废弃物的添加对原打印材料造成的影响,同时分析了当前废弃物制备3D打印材料需要解决的问题,并对废弃物基3D打印材料的发展趋势进行了展望.     

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.     

负载稀土元素活性碳纤维在微型反应器中净化NO废气

以NH3为还原剂，以活性碳纤维（ACF）、HNO，浸渍的ACF、负载CuO的ACF和负载La2O3的ACF为催化剂，在微型反应器中考察各种催化剂对NO催化还原的活性，并进行了差热-热重、扫描电镜分析。实验结果表明，ACF负载La能有效地改善催化剂的活性，且催化活性中心为非晶态的氧化物；当ACF负载20％的La2O3时具有最好的低温活性，NO的去除率最高可达92％以上。     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

粉煤灰和活性污泥对好氧填埋渗滤液组分的影响

通过在好氧反应器中添加粉煤灰和活性污泥来加速固体废物的降解。实验结果表明,添加粉煤灰不但改善了氧气扩散,而且增强了反应器对各种污染物的去除能力,对渗滤液中COD、NH4+、NO3-的去除率分别达到75%、68%和65%以上;添加活性污泥引入了一定量的微生物,也有利于固体废物的降解,渗滤液中COD、NH4+、NO3-的去除率分别达到了90%、65%和77%。因此,通过添加粉煤灰和活性污泥来加速固体废物降解是可行的。     

GIS在城市生活垃圾回收方案规划研究中的应用——以重庆市主城区为例

以重庆市主城区中的三个区为例,演示了GIS在城市生活垃圾回收方案规划研究中的应用:利用GIS的分类、计算和重叠功能,模拟各垃圾回收方案的运行,预测运行结果;利用GIS的可视化功能,将回收行为的空间分布以形象直观的地图形式表现出来,能为管理部门决策制定规划方案和管理措施提供有力的支持与依据。